Connecting I/O Cables For The Secondary Rack - IBM eserver pSeries 690 Installation Manual

Connecting I/O Cables for the Secondary Rack

If you are installing a secondary rack, route the I/O cables from the primary rack to the
secondary rack and connect them to the drawers in the secondary rack.
Primary Rack Rear
Note: For more information about cabling the pSeries 690, see Appendix G,
Eserver pSeries 690 Installation Guide
12
To Primary Rack
Ports 0 and 1
"Subsystem Positioning and Cabling" on page 75.
Secondary Rack Rear
Ports 0 and 1