Connecting I/O Cables For The Secondary Rack - IBM pseries 690 Installation Manual

Connecting I/O Cables for the Secondary Rack

If you are installing a secondary rack, route the I/O cables from the primary rack to the secondary rack
and connect them to the drawers in the secondary rack.
Secondary Rack Rear
Primary Rack Rear
To Primary Rack
Ports 0 and 1
Ports 0 and 1
Note: For more information about cabling the pSeries 690, see Appendix H, "Subsystem Positioning and
Cabling," on page 151.
14 Eserver pSeries 690 Installation Guide