Step 3. Position And Level The Primaryrack - IBM eserver pSeries 690 Installation Manual

Step 3. Position and Level the PrimaryRack

To adjust the leveling feet on the rack, do the following:
1. Ensure the rack is positioned according to the customer plan.
2. Loosen the jam nut on each leveling foot by turning the nut counterclockwise (away
from the bottom of the rack).
3. Rotate each leveling foot downward until it contacts the surface on which the rack is
placed.
4. Adjust the leveling feet downward as needed until the rack is level. When the rack
is level, tighten the jam nuts against the base by turning the nut clockwise (toward
the bottom of the rack).
1
If the customer plans to secure the rack to the floor, see Appendix D, "Securing the
Rack" on page 43.
Eserver pSeries 690 Installation Guide
8
2 3
1 Jam Nut
2 Leveling Foot
3 Rack Base (Front)