Connecting Internal Power Cords For The Secondary Rack - IBM eserver pSeries 690 Installation Manual

Connecting Internal Power Cords for the Secondary Rack

If you are installing a secondary rack, route the power cords from the primary rack to
the secondary rack and connect them to the drawers in the secondary rack. See
Appendix H, "Cabling Information" on page 87 for additional information.
Primary Rack Front
Secondary Rack Front
To Back
To Primary Rack
DCA2-Port 0 & 1
DCA1-Port 0 & 1
11
Chapter 2. Installing the pSeries 690