Download  Print this page

How To Set The System - Honeywell Accenta User Manual

Hide thumbs

Advertisement

How to Set the System

How to Set the System
When you leave your premises you will need to set (or turn on) the intruder alarm system.
Before setting the system you should ensure that the premises have been completely vacated and that all
doors and windows are closed. Ensure that pets do not have access to the protected areas as they can
cause a false alarm.
NOTE: The Accenta Remote LED keypad is not shown. It will have the same indications as the Optima
compact panel with built-in keypad.
NOTE: There will be no exit beeps if Silent Timed exit mode was programmed.
LCD Keypad: the Day LED should be on. The screen shows the day mode:
LED Keypad: the Day LED should be on.
NOTE: You should wait until you hear that the exit beep has stopped before assuming that the system has
set.
LCD Keypad:
Enter your 4-digit code (0123 default) and check that the system
is clear.
The exit tone begins to sound and the display shows program 1 in
process of setting.
Leave the premises by the agreed exit route.
The exit tone becomes rapid during the last 10 seconds and
then stops when the system sets. The Day LED goes off and
SYSTEM SET appears on the screen
After 30 seconds the set mode display appears.
LED Keypad:
The system is unset. The Power and Day LED's are on.
Enter your 4-digit code (0123 default) and check that the
system is clear (no zone LED's on).
The exit tone begins to sound to indicate that the system is
in the process of setting.
Leave the premises by the agreed exit route.
The exit tone becomes rapid during the last 10 seconds and
then stops when the system sets. The Day LED goes off.
Accenta/Optima User Guide
Enter Your Code
Enter Your Code
Enter Your Code
Enter Your Code
Enter Your Code
* * * *
* * * *
* * * *
* * * *
* * * *
Program 1 Set
Program 1 Set
Program 1 Set
Program 1 Set
Program 1 Set
** SYSTEM SET **
** SYSTEM SET **
** SYSTEM SET **
** SYSTEM SET **
** SYSTEM SET **
S u n d a y
S u n d a y
S u n d a y
2
Sunday
01-Jan
14:10
1 2 3 4 5 6 7 8
Zones
[4-digit code]
S u n d a y
0 1 - J a n
0 1 - J a n
S u n d a y
0 1 - J a n
0 1 - J a n
0 1 - J a n
14:10
14:10
14:10
14:10
14:10
[4-digit code]
Day Power
TA
PA
Power
Day
ower
Attack
Tamper
Day

Hide quick links:

Advertisement

loading

  Also See for Honeywell Accenta

This manual is also suitable for:

Optima