Changing Codes Using User 1 - Honeywell Accenta User Manual

Accenta/Optima User Guide

Changing Codes Using User 1

You should change your code regularly to prevent potential intruders from knowing your code. All codes are
4-digits. The factory set code is [0][1][2][3]. User code 1 can only be changed by user 1.
To change user code:
LCD Keypad:
• Press [PROG] and then enter your code [0][1][2][3]. The
Day LED goes off to indicate that you are in Programming
mode. The first menu Walk Test appears on the screen.
• Press the [8] button on the keypad to enter User Set-Up.
• Press the [1] or [2] button on the keypad to
edit the required user.
• Enter the new [4-digit code]. If the code is accepted the
system will produce a double beep. If it is rejected the code
may already be in use and the system will produce a flat tone.
You must choose a different 4-digit code.
• Upon the last keypress the code is saved.
• Press [RESET] twice to exit Programming mode. The Day
LED will come on with the screen in Day mode.
LED Keypad:
• Press [PROG] and then enter your code [0][1][2][3]. The
Tamper (TA) LED comes on and the Day LED goes off to
indicate that you are in Programming mode.
• Press the [8] button on the keypad. LED's 1 and 2 are on to
indicate that you have two options, user 1 and user 2.
• Press the [1] or [2] button on the keypad to
edit the required user. LED's 1-4 are on.
• Enter the new [4-digit code]. If the code is accepted the
system will produce a double beep. If it is rejected the code
may already be in use and the system will produce a flat tone.
You must choose a different 4-digit code.
• Upon the last keypress the code is saved. LED's 1-4 are off.
• Press [RESET] twice to exit Programming mode. The Day
LED comes on and the Tamper (TA) goes off.
How to Change User Codes
0>Walk Test 0>Walk Test 0>Walk Test
0>Walk Test 0>Walk Test
8>Set Up 8>Set Up
8>Set Up 8>Set Up 8>Set Up
User [Number] User [Number] User [Number]
User [Number] User [Number]
Edit Code Edit Code Edit Code
Edit Code Edit Code
- - - - - - - - - - - - - - - - - - - -
Code Saved Code Saved
Code Saved Code Saved Code Saved
S u n d a y S u n d a y
S u n d a y S u n d a y S u n d a y
9
[PROG] then [0][1][2][3]
[8]
[1] or [2]
[4-digit code]
[RESET]
0 1 - J a n 0 1 - J a n
0 1 - J a n 0 1 - J a n 0 1 - J a n
14:10 14:10 14:10 14:10 14:10
[PROG] then [0][1][2][3]
1 2 3 4 5 6 7 8
Zones
[8]
1 2 3 4 5 6 7 8
Zones
[1] or [2] then [4-digit code]
1 2 3 4 5 6 7 8
Zones
[RESET]
1 2 3 4 5 6 7 8
Zones
ower
Attack
Tamper
Day
ower
Attack
Tamper
Day
ower
Attack
Tamper
Day
ower
Attack
Tamper
Day