Download  Print this page

How To Silence An Alarm And Reset The System - Honeywell Accenta User Manual

Hide thumbs

Advertisement

Accenta/Optima User Guide
LED Keypad:
The Day LED should be on.
Enter your code [0][1][2][3]. The exit beep starts.
Press the [PROG] key. The exit tone stops and the zone
LED's 1 to 3 come on.
Select part-set program [2] or [3]. The system will set after a
short time. The Day LED goes out.
NOTE: There will be no exit beeps if Silent Timed exit mode was
programmed.

How to Silence an Alarm and Reset the System

If your system goes into alarm then be aware that intruders may be in
the premises. Seek assistance before investigating the cause of the
alarm.
LCD Keypad:
Enter your code [0][1][2][3]. The alarm will stop.
The screen alternates showing what caused the alarm and
prompting for user reset
When two or more alarms have occured, the first alarm will have an
F below the zone number, Tamper or PA. Subsequent alarms will
have a 1 indicating where the alarm has taken place.
Press [RESET]. The system resets and goes into day mode if
there are no open Tampers, PA or Fire zones to cause a fault
lockout.
The system can be reset by the user only if the installer has pro-
grammed it to do so. If the message Engineer Restore Required
appears on screen then the user will have to contact the installer.
After 30 seconds the set mode display appears.
How to Silence an Alarm
Enter Your Code
Enter Your Code
Enter Your Code
Enter Your Code
Enter Your Code
12345678
12345678
12345678
12345678
12345678
00100000
00100000
00100000
00100000
00100000
Restored
Restored
Restored
Restored
Restored
by User
by User
by User
by User
by User
S u n d a y
S u n d a y
S u n d a y
S u n d a y
S u n d a y
5
1 2 3 4 5 6 7 8
Zones
[0][1][2][3] then [PROG]
1 2 3 4 5 6 7 8
Zones
[2 or 3]
1 2 3 4 5 6 7 8
Zones
[0][1][2][3]
TP
TP
TP
TP
TP
0F
0F
0F
0F
0F
User Restore
User Restore
User Restore
User Restore
User Restore
Press Reset
Press Reset
Press Reset
Press Reset
Press Reset
[RESET]
0 1 - J a n
0 1 - J a n
0 1 - J a n
0 1 - J a n
0 1 - J a n
14:10
14:10
14:10
14:10
14:10
ower
Attack
Tamper
Day
ower
Attack
Tamper
Day
ower
Attack
Tamper
Day

Hide quick links:

Advertisement

loading

  Also See for Honeywell Accenta

This manual is also suitable for:

Optima