D-Link DGS-3024 Manual page 54

Parameter
MSTI ID
Type
VID List (1-4094)
Click Apply to implement changes made.
To configure the settings for the CIST, click on its hyperlinked MSTI ID number in the Current MST Configuration
Identification window, which will reveal the following window to configure:
The user may configure the following parameters to configure the CIST on the Switch.
Parameter
MSTI ID
Type
VID List (1-4094)
Click Apply to implement changes made.
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number, which will reveal the
following window for configuration.
DGS-3024 Gigabit Ethernet Switch Manual
Description
Enter a number between 1 and 15 to set a new MSTI on the Switch.
Create is selected to create a new MSTI. No other choices are available for this field
when creating a new MSTI.
This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number 1 to 4094.
Figure 7- 18. Instance ID Settings window - CIST modify
Description
The MSTI ID of the CIST is 0 and cannot be altered.
This field allows the user to choose a desired method for altering the MSTI settings.
The user has two choices.
Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction with
the VID List parameter.
Remove VID - Select this parameter to remove VIDs from the MSTI ID, in con-
junction with the VID List parameter.
This field is used to specify the VID range from configured VLANs set on the
Switch. Supported VIDs on the Switch range from ID number 1 to 4094.
40