8021Q Port Settings - D-Link DGS-3024 Manual

The following fields can then be set in either the Add or Modify 802.1Q Static VLANs windows:
Parameter Description
VID (VLAN ID)
VLAN Name
Advertisement
Port Settings
Tag
None
Egress
Forbidden
Click Apply to implement changes made.

8021Q Port Settings

In the Configuration menu, open the VLANs folder and click 8021Q Port Settings.
This GVRP Settings window (shown below), allows you to determine whether the Switch will share its VLAN
configuration information with other GARP VLAN Registration Protocol (GVRP) enabled Switches. In addition, Ingress
Checking can be used to limit traffic by filtering incoming packets whose PVID does not match the PVID of the port.
Results can be seen in the table under the configuration settings, as seen below.
DGS-3024 Gigabit Ethernet Switch Manual
Figure 7- 34. second 802.1Q Static VLANs window (Modify)
Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an existing
VLAN in the Modify window. VLANs can be identified by either the VID or the VLAN
name.
Allows the entry of a name for the new VLAN in the Add window, or for editing the VLAN
name in the Modify window.
Enabling this function will allow the Switch to send out GVRP packets to outside
sources, notifying that they may join the existing VLAN.
Allows an individual port to be specified as member of a VLAN.
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will
designate the port as Tagged.
Allows an individual port to be specified as a non-VLAN member.
Select this to specify the port as a static member of the VLAN. Egress member ports
are ports that will be transmitting traffic for the VLAN. These ports can be either tagged
or untagged.
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
57