Table of Contents
Advertisement
Performing Recording and Playback in Connection with the V-Mixer (2)
You can connect the R-1000 inline between your digital snake units and your V-Mixer to record and play back audio.
• Recording The R-1000 records audio from the inputs of the digital snake units. The audio channels from the digital snake units will also be
throughput to the V-Mixer's A and B ports.
• Playback
Tracks played back in the R-1000 will be routed to the REAC A and REAC B ports of the V-Mixer.
In this scenario, you can use the virtual preamp function of the R-1000 to adjust track playback volume using the preamp gain
controls of your V-Mixer. Any adjustments are reflected in the digital snake units preamp.
fig.thru-connection.eps
STAGE
FOH (Front of House)
R-1000
REAC Slave Device
The sampling rate of your R-1000 recording project must match the sampling rate of your V-Mixer. If the sampling rates are not matched, your
recording will not work properly.
If you have set the R-1000's clock source to [WORD CLOCK], the samplig frequency of the R-1000 and the V-Mixer must match the sampling
frequency of your external clock source.
REAC
Slave
Device
S-1608
48ch
D
C
B
S-1608
A
Use in Connection with the V-Mixer
REAC
Slave
Device
A
B
M-300
REAC Master Device
7
Advertisement
Table of Contents
