Table of Contents
Advertisement
Sync Operation with External Devices
Synchronizing multiple R-1000 units
You can use a word clock generator to sync two R-1000 units together. When two units are synchronized as below, recording up
to 96 channels is possible.
* Maximum channel count at 44.1 or 48kHz is 96. Maximum channel count at 96kHz is 48.
Make sure the sampling frequency of your R-1000 projects matches the sampling frequency of your word clock generator.
You'll need to connect a MIDI cable between the two R-1000 units as shown.
fig.96ch-rec.eps
REAC Slave Device
S-1608
48ch
R-1000
R-1000 setup
Parameter
MMC/MTC Master Unit
• REAC SETUP
EXT.CLOCK with D.SNAKE
• CLOCK SOURCE
WORD CLOCK
• TC SOURCE
INTERNAL
• FRAME RATE
30
• MMC MODE
MASTER
• MTC OUTPUT
ON
• MIDI OUT/THRU
OUT
REAC mode setup on the Digital Snake units
Set the REAC mode to [SLAVE].
16
REAC Slave Device
S-4000S-3208
IN
B
A
MTC/MMC
Slave Unit
IN
Clock
REAC Slave Device
S-1608
MIDI
48ch
R-1000
OUT
IN
Clock
Word Clock Generator
MMC/MTC Slave Unit
EXT.CLOCK with D.SNAKE
WORD CLOCK
MIDI (MTC)
30
SLAVE
OFF
OUT
REAC Slave Device
S-4000S-3208
B
A
MTC/MMC
Master Unit
Advertisement
Table of Contents
