Table of Contents
Advertisement
Recording Output from the V-Mixer on the R-1000
You can record the output of your V-Mixer by connecting the R-1000 to the REAC SPLIT jack of your V-Mixer. In this scenario you
will also need to connect the MIDI IN and MIDI OUT cables as shown.
fig.rec-split-out.eps
STAGE
S-1608
M-480
The sampling rate of your R-1000 recording project must match the sampling rate of your V-Mixer. If the sampling rates are not matched, your
recording will not work properly.
REAC
Slave
Device
MIDI
OUT/THRU
A
B
SPLIT
REAC Master Device
REAC
Slave
Device
S-1608
MIDI IN
40ch
REAC Split Device
MTC Output
MIDI OUT/THRU
Use in Connection with the V-Mixer
MIDI
MIDI
OUT/THRU
IN
A
: ON
: OUT
FOH (Front of House)
3
Advertisement
Table of Contents
