Roland R-1000 Manual page 12

Sync Operation with External Devices
About sync settings of the R-1000
You can sync the R-1000 to other devices. Set the following [SYNC] menu settings according to your sync setup. For details of
parameter setup, refer to "Menu Operations and Menu List" of the owner's manual.
When you perform the sync operation, select [EXT.CLOCK with V-MIXER] or [EXT.CLOCK with D.SNAKE] in REAC SETUP.
CLOCK SOURCE
fig.clocksource-setup.eps
Value Operation
REAC
Provides sync from the R-1000's internal clock.
WORD CLOCK
Synchronises to the WORD CLOCK IN.
VIDEO SYNC
Generates sampling clock from the black burst that is input to VIDEO SYNC IN connector.
* If you select [WORD CLOCK] as CLOCK SOURCE, the sampling frequency of your current project must match the sampling frequency of your
external clock source.
TC SOURCE
fig.TCsource-setup.eps
Value Operation
INTERNAL
Generates timecode from the R-1000's internal clock.
SMPTE (LTC)
Synchronises to SMPTE timecode coming in from SMPTE (LTC) IN connector.
MIDI (MTC)
Synchronises to MIDI timecode coming in from MIDI IN connector.
If [SMPTE (LTC)] or [MIDI (MTC)] is selected as TC SOURCE, set the R-1000's frame rate to match the frame rate of your TC source. .
You can select from below.
fig.framerate.eps
30 30 fps
29.97D 29.97 fps (Drop Frame)
29.97 29.97 fps (Non-Drop Frame)
25 25 fps
24 24 fps
Others
You can set parameters below in [TIMECODE] menu and [MIDI] menu.
fig.other-setup.eps
Parameter Value
CHASE PLAY
OFF/ON
OFFSET
Max 23h59m59s29f
MMC MODE
OFF, MASTER, SLAVE
MTC OUTPUT
OFF/ON
12
Operation
Starts playback automatically at receipt of timecode if this is turned ON.
Offsets the R-1000's timecode.
Sets MIDI Machine Control mode.
Sends MIDI timecode if this is turned ON.