Compare; Copy & Compare; Erase - StarTech.com SATDUP11 User Manual

2. Compare

The Compare function can be used after a duplication s finished to confirm the data on
the target HDD is identical to the source HDD.
3. Copy & Compare
The Copy & Compare function executes a duplication and then automatically executes
the compare function immediately afterwards.

4. Erase

WARNING! Any Data remaining data on any drive connected to a designated erase
port will be over written. Please back up all data before performing any Erase function.
The Erase function allows for three different types of drive erasing: Quick Erase, Full
Erase, and DoD Erase. Select your desired mode to clear all data from the drive. Refer to
functions [4.1 / 4.2 / 4.3] for details.
Notes:
• You can also use the source port and delete two drives simultaneously. Refer to
function [6.3 Erase Master] for details. By default the Source port is disabled as
an erase port.
• The Erase function can be stopped while in process by pressing the [ESC] for 3
to 4 seconds. However, any data that has already been deleted including the
drive partition table cannot be recovered.
4.1 Quick Erase
The Quick Erase function only erases the HDD index table. It is the fastest way to erase
a HDD.
4.2 Full Erase
The full Erase function performs a single pass overwrite which will erase all sectors on
the HDD. It will take a longer time than quick erase.
Instruction Manual
6