Table of Contents
Advertisement
Press the OK button, the Duplicator will analyze the Source
5.
Drive and ensure the Target Drive is ready, by verifying
size and format. The Display Screen will read Copy Waiting
Device.
If the Target Drive has not been formatted as an Image
6.
Drive, the Duplicator will alert you on the Display Screen,
Target Hard Disc Not Formated, press the OK button.
Note: Formatting your HDD/SSD will delete all data stored
on the target drive.
Press the OK button again to format the Target Drive as an
7.
image drive.
When the drives have been analyzed and if necessary,
8.
formatted, the Duplicator will begin to copy the SSD/HDD
image to the image drive.
The image will be completely copied when the % indicator
9.
on the Display Screen reaches 100%. The image drive now
contains the drive image (if working with a non-formatted
drive, an image drive has also been created).
Compare
The Compare function can be used after the HDD duplication
is finished and confirms that the data on the Target HDD is
identical to the Source HDD.
Note: Please be sure to select the sub-menu option that cor-
responds with the Copy Selection (i.e. IMG->HDD, HDD ->
IMG, or HDD -> HDD).
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
10
Advertisement
Table of Contents
