StarTech.com SATDUP11 User Manual
  1. Manuals
  2. Brands
  3. StarTech.com Manuals
  4. Disc Duplicator
  5. SATDUP11
  6. User manual
StarTech.com SATDUP11 User Manual

StarTech.com SATDUP11 User Manual

1 to 1 standalone hard drive duplicator and eraser
Hide thumbs Also See for SATDUP11:
Table of Contents

Advertisement

Quick Links

1 to 1 Standalone Hard Drive Duplicator
and Eraser
SATDUP11
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 07/29/2014
*actual product may vary from photos

Advertisement

Table of Contents
loading

Related Manuals for StarTech.com SATDUP11

Summary of Contents for StarTech.com SATDUP11

  • Page 1 DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.com Manual Revision: 07/29/2014...

  • Page 2: Fcc Compliance Statement

    StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...

  • Page 3: Table Of Contents

    Table of Contents Product Diagram ..................1 Front View ..............................1 Rear View ..............................1 Introduction ....................2 Packaging Contents ..........................2 Hardware Setup ............................3 User Menu Table of Contents ........................ 4 Hardware Operation ................5 1. Copy ................................5 2. Compare ..............................6 3.

  • Page 4: Product Diagram

    Product Diagram Front View 1. Display Screen 2. Navigation buttons 3. OK button 4. Esc button 5. SATA HDD source port 6. SATA HDD Target port Rear View 1. Power Switch 2. Power Adapter Port Instruction Manual...

  • Page 5: Introduction

    Introduction Packaging Contents • 1X – HDD Duplicator/Eraser • 2X – SATA Cables • 1X – Power Adapter • 3X – Power Cords (NA, UK, EU) • 1X – Instruction Manual • 2X- HDD Pads WARNING! Hard drives and storage enclosures require careful handling, especially when being transported.

  • Page 6: Hardware Setup

    Note: For added protection, and heat insolation the source and target drives can be placed on included HDD Pads. WARNING! Any Data remaining on the target drive will be over written. 4. Press the power switch to the “On” position, the SATDUP11 is now ready to use. Instruction Manual...

  • Page 7: User Menu Table Of Contents

    User Menu Table of Contents 1. Copy 2. Compare 3. Copy and Compair 4. Erase 4.1 Quick Erase 4.2 Full Erase 4.3 DoD Erase 4.4 Dod Erase Comp 5.Utility 5.1 Show HDD 5.1.1 Model Number Info 5.1.2 Version of Firmware 5.1.3 Serial Number 5.1.4 Device Power Cycle 5.1.5 Power-On Hours...

  • Page 8: Hardware Operation

    Hardware Operation 1. Copy The copy function copies data from the source HDD to the target HDD. Please ensure you have selected your desired copy mode before executing the copying process. Refer to function [6.1 Copy Area] for details. Note: By Default quick copy mode “System and Files” is selected. Copy Process Total Data Capacity Copy...

  • Page 9: Compare

    2. Compare The Compare function can be used after a duplication s finished to confirm the data on the target HDD is identical to the source HDD. 3. Copy & Compare The Copy & Compare function executes a duplication and then automatically executes the compare function immediately afterwards.
  • Page 10 4.3 DoD Erase DoD Erase is a three pass overwrite erase which erases all sectors of the HDD. It can guarantee the data was fully deleted by erasing the HDD bit for bit three times. DoD Erase will damage the data on the HDD, so please make sure you have backed up all important data before using this function.

  • Page 11: Utility

    4.4 DoD Erase Comp DoD Erase & Compare performs a standard DoD Erase as described above, then performs a sector by sector check to verify that the drive has been erased. As it does the most thorough Erasing job, it is also takes the most time to complete. 5.
  • Page 12 5.1.2 Version of Firmware The Version of Firmware function displays the HDD firmware version of the HDD connected to the source port. Model: WDC WD [Disc Info] 500BPVT-00HXZT3 1. Model Number 5.1.3 Serial Number The Serial Number function displays the serial number of the HDD connected to source port.
  • Page 13 5.1.5 Power-on Hours The power-on Hours function displays the total number of hours the HDD has been powered-on. [Power on Hours] [Disc Info] 6. Power on Hours 5.1.6 Reallocation Event Count The Reallocation Event Count function displays the number of reallocating events. A reallocation event occurs when the HDD fails to save data.
  • Page 14 StarTech.com Technical Support for assistance. a) Format a blank hard drive with a 10GB FAT32 partition. b) Download the firmware file from the StarTech.com Website, and place the file on the main directory of the new partition. c) Connect the hard drive to the source port of the SATDUP11.
  • Page 15 5.2.2 Create Update HDD Formats the drive connected to the source port of the STADUP11 for BIOS update (10GB FAT32 partition). 5.3 System Info. The System info function displays duplicator information such as model name and firmware version. KD25/35HS Ver: 2.31.0 5.4 Read Speed The Read Speed function measures the reading speed of the HDD by reading the entire drive.

  • Page 16: Setup

    5.5 Write Speed WARNING! Any Data remaining data on any drive connected to a designated erase port will be over written. Please back up all data before performing any Write speed function. The Write Speed function measures the write speed of the HDD by writing data to the entire drive.
  • Page 17 6.1.1 System and Files It will copy source HDD’s System and Files instead of the whole HDD. The system will analyze the source HDD and identify the data area to copy. The copy will be completed as long as the source HDD data is within the size of the target HDD. Note: System and Files only supports FAT, NTFS, and LINUX(ext2/ext3/ext4).
  • Page 18 6.1.3 Whole HDD This mode will copy the entire HDD, regardless of the content, format, partition, or free space, and it will take much more time to duplicate the source HDD completely. 6.2 Skip Error The Skip Error function allows you to define a number of acceptable sector errors during the duplication process in the event that the hard drive has bad sectors on it.

  • Page 19: Unknown Format

    6.4 Advanced Setup From Advanced Setup you can adjust HDD Wait Time, and lock the keys, see details below. a) Select “6.9 Advanced setup” using the navigation buttons. b) From the “Advanced” menu you can select your desired application See the list below outlining the details of each option.

  • Page 20: Technical Support

    Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
  • Page 21 StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.

Table of Contents