StarTech.com SATDUP11 User Manual page 14

5.1.8 Seek Error Rate
The Seek Error Rate function displays the rate of error that occurs while searching for
data. This represents the rate of damaged data that is stored on your HDD.
[Disc Info]
8. Seek Error Rate
5.1.9 Temperature
The Temperature function displays the current HDD temperature.
[Disc Info]
9. Temperature
5.2 Update System
5.2.1 Update Bios
If an update to the device firmware is available on the StarTech.com product page,
this option can be used to update the device. The steps below outline the steps for
executing a system update.
Note: A firmware update should only be done if recommend by StarTech.com.
The below steps should only be performed by advanced users. Please contact
StarTech.com Technical Support for assistance.
a) Format a blank hard drive with a 10GB FAT32 partition.
b) Download the firmware file from the StarTech.com Website, and place the file on the
main directory of the new partition.
c) Connect the hard drive to the source port of the SATDUP11.
d) Using the Navigation Buttons locate "5.2.1 Update BIOS" and press ok.
The update will take place, and the on screen display will alert you upon completion.
Instruction Manual
[Seek Error Rate]
0
[Temperature]
22ºC
11