Setup - StarTech.com SATDUP11 User Manual

5.5 Write Speed
WARNING! Any Data remaining data on any drive connected to a designated erase
port will be over written. Please back up all data before performing any Write speed
function.
The Write Speed function measures the write speed of the HDD by writing data to the
entire drive.
[5. Utility]
5. Write Speed

6. Setup

From the Setup function you can access different advanced configurations. See the list
below outlining the details of each option. Refer to functions [6.1 – 6.9] for details.
6.1 Copy Area
The Copy Area function enables you to adjust the mode in which the hard drives are
copied. Refer to functions [6.1.1 / 6.1.2 / 6.1.3] for details.
1. Select "6.1 Copy Area" using the navigation buttons.
2. From the "Copy Area" menu you can select your desired method of hard drive
duplication. See the list below outlining the details of each option.
Instruction Manual
465G
W 1:08
89.6 M/S 4423M
13
Content will be erased.
Confirm?