Setup; Insert The Battery - Palm AT&T Treo 680 Starting Manual

Tip
Your phone won't
work without a SIM
card. The SIM card
is usually pre-
installed in your
Treo 680, unless
you're upgrading
from a Cingular
phone. Check the
SIM card tray to see
if the SIM card is
installed. The SIM
card tray is tucked
away in a drawer
in the battery
compartment. See
"I need to insert my
SIM card" on page
42 for more info.
If you need a SIM
card, call AT&T
Wireless at 1-800-
331-0500.
2

Insert the battery

1. Remove the battery door.
2. Insert the battery into the compartment.
3. Slide the battery door back into place.
4. Connect the charger.
The touchscreen on your Palm
for the progress bar to fill and the language selection screen to appear.
Press battery door
release
® ™
Treo 680 smart device turns on. Wait

Setup

Align battery
contacts with
compartment
contacts
Treo 680