Setup; Insert The Sim Card - Palm Centro Quick Start Manual

Setup

Insert the SIM card

1. Press the battery door near the top and slide the
battery door downward to remove it from your
® ™
Palm Centro smart device.
2. If the battery is installed, remove it.
3. Remove the stylus to make it easier to install the
Stylus
SIM card. Replace it after you finish these steps.
4. Insert the straight end of the SIM card into the SIM
card holder so that the notch is on the right and the
metal contacts face down.
5. Push the SIM card forward until it fits into place.
6. Replace the battery door.
5