Installation; Unpacking And Removing The Transit Bolts - Baumatic BA140 Instruction Manual

Remove any debris that is in th
removed the drain pump filter from.
S crew the filter clockwise back into position, making sure that it is fully
tightened. You should keep turning until you cannot turn it any further.
R efit the filter cap.
I MPORTANT: Do not perform this operation if the appliance has
stuck on a cycle, until the water inside the machine has cooled
sufficiently. Otherwise the water that comes out of the drain
pump filter may still be hot.
I nstallation
IMPORTANT:
COMPLETED BY A SUITABLY QUALIFIED PERSON.
BAUMATIC ONLY SANCTION
GIVEN
SHOULD KEEP THE TRANSIT PACKAGING, IN CASE
YOU NEED TO TRANSPORT THE MACHINE IN THE
FUTURE.
U npacking the machine and removing the transit bolts
Remove the filter and rinse out
the filter under the tap.
R emove any debris from the
filter.
e area of the appliance that you
THIS

INSTALLATION

IN THIS INSTRUCTION
MUST
THE INSTALLATION
MANUAL.
Remove the base, corner
protection pieces and top
cover.
BE
YOU
30