Baumatic BA140 Instruction Manual page 21

Press the spin selection button and the spin speed will reduce
in 100 rpm increments.
o It is possible to reduce the spin speed from the one
automatically selected by the wash program, down to
400rpm.
YOU MUST DO THIS BEFORE OPENING THE DOOR OF THE
APPLIANCE.
This feature is useful if you are not going to be present when
the wash cycle completes, as it will lessen the chance of the
garments becoming creased.
After the appliance completes the last rinse, the
flash and the drum will rotate approximately every 3 minutes.
Press the spin selection button until the spin speed that you
require
START/STOP button.
If you want the appliance to drain only, press the spin
selection button until the
display, then press the START/STOP button.
appears in the
If you continue to press the spin
reduction button after 400rpm
appears. Then
the LCD display. This means that
the "No spin" option has been
selected and at the end of the
wash cycle, the machine will not
spin at all and the wash program
will finish after it has drained.
If you press the spin reduction
button again, then
in the LCD display. This means
that the "Anti-crease" option
has been selected. The clothes
will be held in water, until you
select a spin or drain program.
LCD display, then
symbol appears in the LCD
will appear in
will appear
symbol will
press the
21