Cancelling Or Pausing A Wash Program - Baumatic BA140 Instruction Manual

o The active phases will appear at the top of the display, as the
wash program progresses. The time remaining until the end of
the program will update throughout the wash cycle. Please note
that it does not count down in "real time".
o Any program option can be selected once the wash cycle is
already in progress, providing that the stage in the wash cycle
that the option will effect has not already passed. (E.g. you
cannot select an intensive wash, once the machine has reached
the rinse stage of the wash cycle).

Cancelling or pausing a wash program

To stop a wash program once a wash cycle is in progress, you
should turn the program selection knob.
o The appliance will go onto PAUSE status and the wash program
will be cancelled.
o The door will remain locked for two minutes before it is possible
to open the door and take out the garments.
Before opening the porthole door, you MUST
drain the appliance; otherwise there may still
be water in the drum when you open the
door.
o It is also possible to put the machine into PAUSE status by
pressing the START/STOP button whilst the wash cycle is in
progress. However this will not cancel the wash program and to
restart the wash cycle, you should press the START/STOP button
again.
19