Selecting A Wash Program - Baumatic BA140 Instruction Manual

Selecting a wash program

Load your
compartment of the soap drawer.
Close the porthole door firmly.
Activate the
program selector knob by
depressing it.
Select
appropriate wash program
for the garments that you
are washing, by turning the
program selector knob.
o The LCD display will briefly flash the wash program number that
you have selected and then show the approximate time that it
will take the chosen wash cycle to complete.
Select any program options by using the program option button
underneath the LCD display (for more information, please refer
to the "setting a program option" section).
o Any program option that you select, will affect the length of time
that the wash cycle will take to complete. The LCD display will
update to reflect this change.
Press the Start/Stop button.
o After approximately 5 seconds, you will hear your washing
machine start the wash cycle.
o If there is a power failure or the plug is pulled out of the
socket when a wash cycle is in progress. Once power has
been restored, the wash program will continue.
laundry and put
pop out
the most
detergent in
o Whilst the wash program is
in progress,
phase and time remaining to
the end of the wash cycle will
appear on the display.
the relevant
the program
18