Installation; Unpacking And Removing The Transit Bolts - Baumatic BTWM5 Instruction Manual

Remove any debris that is in the area of the appliance that you
removed the drain pump filter from.
Screw the filter clockwise back into position, making sure that it is fully
tightened. You should keep turning until you cannot turn it any further.
Refit the filter cap.
IMPORTANT: Do not perform this operation if the appliance has
stuck on a cycle, until the water inside the machine has cooled
sufficiently. Otherwise the water that comes out of the drain
pump filter may still be hot.

Installation

IMPORTANT: THIS INSTALLATION MUST BE
COMPLETED BY A SUITABLY QUALIFIED PERSON.
BAUMATIC ONLY SANCTION THE INSTALLATION
GIVEN IN THIS INSTRUCTION MANUAL. YOU
SHOULD KEEP THE TRANSIT PACKAGING, IN CASE
YOU NEED TO TRANSPORT THE MACHINE IN THE
FUTURE.
Unpacking the machine and removing the transit bolts
Remove the filter and rinse out
the filter under the tap.
Remove any debris from the
filter.
Remove the base, corner
protection pieces and top
cover.
29