Table of Contents
Advertisement
o If there is a power failure or the plug is pulled out of the
socket when a wash cycle is in progress, once
been restored, the wash program will continue.
Whilst the wash program is in progress, the time remaining to
o
the end of the wash cycle will appear on the display.
Cancelling or pausing a w
o To stop a wash program once a wash cycle is in progress, you
should press and h
seconds.
o To cancel the program, turn the program selection kn
the OFF position.
o If you wish to add or rem
for two minutes before it is possible to open the door.
o Clos
e
the door and press the Start / Pause button (C) to
conti
n
ue the wash cycle.
Before
drain the appliance; otherwise there may still
be water in the drum when you open the
door.
De
lay start feature
Your appliance has a delay start feature, which allows you to pa
the start of a
wash cycle until a later time. You can delay the start
time by 3, 6 or 9 hours.
o Follow the process listed under "Selecting a wash program".
o Before pressing the Start / Pause button (C), you should select
the length of time that you want to delay the wash program for
by pressing the delay start button (D). The relevant LED will
light on the display to sh
o Press the Start / Pause button (C) to begin the delay
countdo
wn. The indicator light for the chosen delay time will stop
blinking and remain on.
o At the end of the required delay time, the chosen program will
begin.
ash program
old the Start / Pause button (C) for about 2
ove items the door will remain locked
opening the porthole door, you MUST
ow the set delay time.
power has
ob (K) to
use
20
Advertisement
Table of Contents
