Environment And Condition Of Use; About Transceiver - Alinco DR-138 Instruction Manual

Alert

Environment and condition of use

It is recommended that you check local traffic regulations regarding the use of
a radio equipment while driving. Some countries prohibit or apply restrictions
for the operation of radios and mobile- phones while driving.
Do not use this product in close proximity to other electronic devices,
especially medical ones. It may cause interference to those devices.
Keep the radio out of the reach of children. This product is not a toy and
contains small part that may be dangerous when swallowed.
In case a liquid leaks from the product, do not touch it. It may damage your
skin. Rinse with plenty of cold water if the liquid contacted your skin.
Never operate this product in facilities where radio products are prohibited for
use such as aboard aircraft, in airports, in ports, within or near the operating
area of business wireless stations or their relay stations.
Use of this product may be prohibited or illegal outside of your country. Be
informed in advance when you travel.
The manufacturer declines any responsibilities against loss of life and/or a
property due to a failure of this product.
Do not use multiple radios in very close proximity. It may cause interference
and/or damage to the product(s).
Alert
Environment and condition of use
Do not use the product in proximity to a TV or a radio. It may cause
interference or receive interference.
Do not install in a humid, dusty or insufficiently ventilated place. It may result
in electric shock, fire and/or malfunction.
Do not install in an unstable or vibrating position. It may result in electric
shock, fire and/or malfunction when/if the product falls to the ground.
Do not install the product in proximity to a source of heat and humidity such
as a heater or a stove. Avoid placing the unit in direct sunlight.
Be cautious of a dew formation. Please completely dry the product before
use when it happens.

About transceiver

Do not connect devices other than specified ones to the jacks and ports on
the product. It may result in damage to the devices.
Turn off and remove the power source (AC cable, DC cable, battery, cigar
cable, charger adapter etc.) from the product when the product is not in use
for extended period of time or in case of maintenance.
Use a clean, dry cloth to wipe off dirt and condensation from the surface of
the product. Never use thinner or benzene for cleaning.
Check with your local waste officials for details on recycling or proper
disposal in your area.
PC PROGRAMMING
NOTE: The utility software may be available to distributors/dealers only. USB
programming cable is required. The manufacturer will not release the software to
unauthorized party so please contact your dealer for details.