Anti-Theft Alarm - Alinco DR-138 Instruction Manual

10

Anti-theft Alarm

Optional alarm cable
[UX1259]
Steering-wheel etc.
Optional extention cable (if necessary)
27
A loud alert beep sounds when the unit is about to be removed in an
improper manner.This function is useful when the unit is installed in a
vehicle.
Setting: Connect the DC cable direct to the battery as shown.
Operation:
1. Connect the optional alarm cable to the DATA jack on the front
panel as shown WHILE POWER IS ON. Secure the other end
of the cable to an object that stays fixed in the vehicle. Use an
optional extension cable if necessary.
2.
Turn off the unit by pressing the PWR key. The alarm is now active.
3. To operate, turn on the unit first then remove the cable while power
is ON.
DC power cable
[UX1260]
By removing or cutting the cable before turning on will sound alarm. To
turn off the alarm, press PWR key to turn off the power. The alarm is
canceled and turns on normally when PWR key is pressed next time.
Battery