Transferring Calls - Cisco 7931G Phone Manual

Transferring Calls

Transfer redirects a connected call. The target is the number to which you want to transfer the call
When you transfer a call, your phone uses a new line to initiate the transfer.
If you want to...
Transfer a call without
talking to the transfer
recipient
Talk to the transfer
recipient before transferring
a call (consult transfer)
Redirect a call to a voice
message system
Tips
• If on-hook transfer is enabled on your phone, you can either hang up to complete the call, or press
and then hang up.
• If on-hook transfer is not enabled on your phone, hanging up without pressing
the call on hold.
• You cannot use
transferring it.
D i t d o c u me n t wo r d t u a a n g e b o d e n d o o r T e l e c o mH u n t e r . D é z a k e l i j k e T e l e c o m we b s h o p .
T 0 8 8 7 4 6 3 4 4 4 | @ s a l e s @T e l e c o mH u n t e r . n l | www. T e l e c o mH u n t e r . n l
22
Then...
1. From an active call, press
2. Enter the target number.
3. Press again to complete the transfer or EndCall to cancel.
Note If your phone has on-hook transfer enabled, complete the transfer
by hanging up.
1. From an active call, press
2. Enter the target number.
3. Wait for the transfer recipient to answer.
4. Press again to complete the transfer or EndCall to cancel.
Note If your phone has on-hook transfer enabled, complete the transfer
by hanging up.
Press iDivert. For more information, see
Message System, page
to redirect a call on hold. Press Resume to remove the call from hold before
.
.
Sending a Call to a Voice
23.
again places
OL-12546-01