Logging Out Of Hunt Groups - Cisco 7931G Phone Manual

If you want to...
Direct and store an
active call at a directed
call park number
Retrieve a parked call
from a directed call
park number
Tips
• You have a limited time to retrieve a parked call before it reverts to ringing at the original number.
See your system administrator for details.
• Your system administrator can assign Directed Call Park buttons to available line buttons on your
phone.
• You can dial directed call park numbers if you do not have Directed Call Park buttons on your
phone. However, you will not be able to see the status of the directed call park number.

Logging Out of Hunt Groups

If your organization receives a large number of incoming calls, you might be a member of a hunt group.
A hunt group includes a series of directory numbers that share the incoming call load. When the first
directory number in the hunt group is busy, the system hunts for the next available directory number
in the group and directs the call to that phone.
When you are away from your phone, you can prevent hunt group calls from ringing your phone by
logging out of hunt groups.
If you want to...
Log out of hunt groups to
temporarily block hunt group
calls
Log in to receive hunt group
calls
Tip
Logging out of hunt groups does not prevent non-hunt group calls from ringing your phone.
D i t d o c u me n t wo r d t u a a n g e b o d e n d o o r T e l e c o mH u n t e r . D é z a k e l i j k e T e l e c o m we b s h o p .
T 0 8 8 7 4 6 3 4 4 4 | @ s a l e s @T e l e c o mH u n t e r . n l | www. T e l e c o mH u n t e r . n l
Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0
Then...
1. During a call, press
2. Press Directed Call Park
number.
A Directed Call Park
number is not available.
3. Press Transfer again to finish storing the call.
From any Cisco Unified IP Phone in your network, enter the park retrieval
prefix and dial the directed call park number. Or after entering the park
retrieval prefix, press the
Then...
Press HLog . Your phone screen displays, "Logged out of Hunt
Group."
Press HLog . When logged in, the Hunt Group
.
( ) to speed dial the directed call park
(flashing) ( ) indicates the directed call park
(flashing) ( ) to connect to the call.
Advanced Call Handling
button is lit.
33