Cisco 7931G Phone Manual page 35

If you want to...
View a list of conference
participants
Get an updated list of
conference participants
See who started the
conference
Remove any conference
participant
Drop the last party added to
the conference
End your participation in a
standard conference
Verify that a conference call is
secure
Remove a non-secure
participant from a conference
Tips
• To start a secure conference, you must use a phone configured with security.
• Non-secure conferences and participants display a
• Depending on how your phone is configured, if you leave a conference after initiating it, the
conference might end. To avoid this, transfer the conference before hanging up.
D i t d o c u me n t wo r d t u a a n g e b o d e n d o o r T e l e c o mH u n t e r . D é z a k e l i j k e T e l e c o m we b s h o p .
T 0 8 8 7 4 6 3 4 4 4 | @ s a l e s @T e l e c o mH u n t e r . n l | www. T e l e c o mH u n t e r . n l
Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0
Then...
1. Press (steady) with an active conference.
2. Press ConfList.
Participants are listed in the order in which they join the conference
with the most recent additions at the top.
While viewing the conference list, press Update.
While viewing the conference list, locate the person listed at the
bottom of the list with an asterisk (*) next to the name.
1. While viewing the conference list, highlight the participant's
name.
2. Press Remove.
While viewing the conference list, press RmLstC.
Hang up or press EndCall.
Look for the or
screen.
While viewing the Conference List, locate the participant without the
or icon, and press Remove.
Check with your system administrator to see if non-initiators of a
conference can remove participants.
icon after "Conference" on the phone
icon.
Basic Call Handling
27