Accessing Voice Messages - Cisco 7931G Phone Manual

Accessing Voice Messages

To access voice messages, use the Messages button
Your company determines the voice message service that your phone system uses. For the most
Note
accurate and detailed information, refer to the documentation that came with your voice
message service.
If you want to...
Set up and personalize
your voice message
service
Check for your new
voice messages
Listen to your voice
messages or access the
voice messages menu
Send a call to a voice
message system
D i t d o c u me n t wo r d t u a a n g e b o d e n d o o r T e l e c o mH u n t e r . D é z a k e l i j k e T e l e c o m we b s h o p .
T 0 8 8 7 4 6 3 4 4 4 | @ s a l e s @T e l e c o mH u n t e r . n l | www. T e l e c o mH u n t e r . n l
Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0
Then...
Press ) > Messages and follow the voice instructions.
(
If a menu appears on your phone screen, choose an appropriate menu item.
Look for:
• A steady red light on your handset. (This indicator can vary. See
Customizing Rings and Message Indicators, page
• A message waiting icon
Note The red light and message waiting icon display only when you have a
message on your primary line, even if you receive voice messages on
other lines.
Listen for:
• A stutter tone from your handset, headset, or speakerphone when you
place a call.
Note The stutter tone is line-specific. You hear it only when using the line
with the waiting message.
Press ) > Messages.
(
Depending on your voice message service, doing so either auto-dials the
message service or provides a menu on your phone screen.
Press iDivert. For more information, see
System, page 23.
Accessing Voice Messages
) > Messages.
(
and text message on your phone screen.
Sending a Call to a Voice Message
43.)
51