Table of Contents
Advertisement
Quick Links
OEM SALES
CORPORATE OFFICE
www.
8 Shackleford Plaza,
1020 Owen Loop South
Suite 201
Eugene, OR 97402
rosenaviation
Little Rock, AR 72211
1-888-668-4955
.com
1-888-523-7523
Fax (541) 342-4912
Fax (501) 225-1015
Document # 9200-0102-835 Rev H
10.4
DEALER & OPERATOR SALES
1121 Warren Ave, Suite 240
Downers Grove, IL 60515
1-800-859-5058
Fax (630) 963-4405
9200-0102-835
DISPLAY
DISPLAY
1042
Compliant to DO-160D
SlimLine
Model Number
1042
www.
rosenaviation
.com
Advertisement
Table of Contents
Related Manuals for Rosen Aviation 1042
Summary of Contents for Rosen Aviation 1042
- Page 1 10.4 SlimLine Model Number 1042 DISPLAY DISPLAY 1042 OEM SALES CORPORATE OFFICE DEALER & OPERATOR SALES www. www. 8 Shackleford Plaza, 1121 Warren Ave, Suite 240 1020 Owen Loop South Suite 201 Eugene, OR 97402 Downers Grove, IL 60515 rosenaviation...
-
Page 2: Table Of Contents
Table of Contents Introduction and Display Overview ....3 Display Diagram ..........4 Pinouts ..............6 Operation ............9 Specifications ........... 12 DO-160D Test MatrixDO-160D Test Matrix ....13 Troubleshooting ..........14 Disclaimer ............16 Rosen Aviation Displays... - Page 3 1020 Owen Loop South Eugene OR 97402 541-342-3802 www.rosenaviation.com...
-
Page 4: Introduction And Display Overview
Introduction and Display Overview Introduction and Display Overview Welcome to the 1042 Technical Manual for the 10.4" LCD monitor This manual provides an overview of display details including: • Pinouts • Installation • Operation • Troubleshooting • Specifications The 1042 base model includes the following features: •... -
Page 5: Display Diagram
Display Diagram Display Diagram (Inches) 1042-010 (Shown) 10.4” LCD... - Page 6 Display Diagram 1042-010 (Shown) Rosen Aviation Displays...
-
Page 7: Pinouts
Pinouts Pinouts Slimline Base Receptacle Model 0100-010 & 0100-012 Connector: 9 Pin Male D-Subminiature Positronic SDM0000Z Mate: 9 Pin Female D-Subminiature Positronic SD9F0000X Pin # Monitor Signal Reserved +28V DC DC Return *Conn to pin 5 *Conn to pin 4 Reserved Video Signal Input Video Ground... -
Page 8: Main Interface Signal
Reserved Green Return Video Shield Blue Return S Video Ground Reserved Y-Signal Computer Ground 23. C-Signal Power on / off Video Signal Input (NTSC, PAL) Reserved 28 Volt DC (+) Horizontal Sync Power Supply Return DC (-) Rosen Aviation Displays... - Page 9 Pinouts Pinouts External Control Interface (0300-404) The external control interface is a 9-pin standard density D- subminiature male connector. Control Signal Reserved Menu Adjust + Select + Reserved Reserved Adjust- Select - 10.4” LCD...
-
Page 10: Operation
Operation Operation Ensure that when plugging the arm into the base receptacle, the arm’s slot faces toward the release button (as shown) and the connection is not forced. Rosen Aviation Displays... - Page 11 Operation Operation (Cont) Utilities : User Setting : User Timeout : adjust the OSD menu timeout period in a step of 5 seconds DPMS : Disable / Enable the DPMS function Auto Source Select : Off - Disable auto source select function. Low - Auto source select enable ONLY in power up.
- Page 12 The OSD settings chosen will be stored in memory. The OSD menu can be cleared from the screen by moving the selection bar to the EXIT icon pressing the + button otherwise it will automatically clear after a few seconds (time-out period) of non-use. Rosen Aviation Displays...
-
Page 13: Specifications
Specifications Specifications LCD Performance Screen Resolution (pixels) 640 w x 480 h Display Viewing Area 8.31 x 6.24 In Viewing Angle ( At contrast ratio 10:1 ) Horizontal ±70º Vertical 45º up 55º down Contrast Ratio 300:1 (typical) Backlight Lamp Life (hours) 50,000 hrs Screen Brightness 350 cd/m... -
Page 14: Do-160D Test Matrixdo-160D Test Matrix
RF Suscept (Cond&Rad) Emission of RF Energy Lightning Induced Trans Lightning Direct Effects Icing Electrostatic Discharge X= Not Tested Technical Support For field support or to order parts, contact Rosen Aviation Displays at: 1-888-668-4955 or visit us at: www.rosenaviation.com Rosen Aviation Displays... -
Page 15: Troubleshooting
Troubleshooting Troubleshooting PROBLEM POSSIBLE SOLUTION No Power •Verify that the pinout is correct •Push and hold the power switch for about one second No Video •Verify that the monitor is getting power and the pinout is correct •Verify that the video source is on and has a tape or DVD installed •Verify signal at monitor end. - Page 16 Rosen Aviation Displays...
-
Page 17: Disclaimer
Rosen’s only obligations are those in the Rosen Standard Terms and Conditions of Sales for this product, and in no case will Rosen be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product.
Need help?
Do you have a question about the 1042 and is the answer not in the manual?
Questions and answers