2 SETTING ITEMS (ADMIN)
3
Confirm the settings and press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
Error messages
The following error messages may be displayed on the touch panel.
[802.1X] Auth Server/Switch couldn't be contacted
[802.1X] Authentication failed
[802.1X] Falling back to non-802.1X mode
148
IEEE 802.1X Authentication Setting
Message
Cause
The RADIUS server service is stopped.
Configuration for the RADIUS server is not correct.
IEEE 802.1X switch has problem.
The username or password that user entered is not correct.
Network communication is begun using the fall back function,
ignoring IEEE 802.1X authentication.