Setting The Smb Protocol - Toshiba e-studio4520C Management Manual

2 SETTING ITEMS (ADMIN)

Setting the SMB protocol

When you want to enable this equipment visible in the Windows network, you must enable the SMB protocol and enter the
NetBIOS name and workgroup to specify the device name of this equipment and workgroup where this equipment will be
visible.
Also if your network uses the WINS server to allow the SMB communication across the segments, you must specify the
WINS server address, so that this equipment will be visible from the different segment.
This must be enabled for SMB printing, Save as file to the network folder using SMB, and sharing the "FILE_SHARE"
folder (that is the local folder of this equipment) in the network.
1
Press [NETWORK] in the ADMIN menu.
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
P.63 "Entering Admin Menu"
2
Press [SMB].
The SMB screen is displayed.
100 Setting Network Functions