Toshiba e-studio4520C Management Manual page 107

2.SETTING ITEMS (ADMIN)
3
Specify following items as required and press [OK].
ENABLE HTTP SERVER — Press [ENABLE] to enable the HTTP network server service, or [DISABLE] to disable
the HTTP network server service. This option must be enabled for TopAccess and e-Filing web utility.
[PRIMARY PORT NUMBER] — Press this button to enter the primary port number to be used for the HTTP access
from the other client. It is recommended to use the default port number "80" if you are not sure changing this port
number.
[SECONDARY PORT NUMBER] — Press this button to enter the secondary port number to be used to access the
TopAccess and e-Filing web utility. It is recommended to use the default port number "8080" if you are not sure
changing this port number.
ENABLE SSL — Press [ENABLE] to enable the SSL for accessing TopAccess and e-Filing web utility, or
[DISABLE] to disable the SSL for accessing TopAccess and e-Filing web utility. When this option is enabled, the
data transferred between the equipment and client computers will be encrypted using a private key when operating
TopAccess and e-Filing web utility.
To enable SSL, you must create a self-signed certificate in the equipment or import the server certificate using
TopAccess. If the self-signed certificate is not created or the server certificate is not imported, the SSL cannot
be enabled.
4
Continue to another network setting if required, then press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
2 SETTING ITEMS (ADMIN)
Setting Network Functions 105