Setting The Energy Saver Mode - Toshiba e-studio4520C Management Manual

2 SETTING ITEMS (ADMIN)

Setting the energy saver mode

The following energy saver modes are available in this menu.
Weekly timer
Using the built-in weekly timer, you can have this equipment automatically turned ON and OFF at specified times. For
instance, you can set the timer for the starting time and closing time of your office so that the copier will automatically
turn itself ON and OFF at those specified times.
You can turn on the power simply pressing the [START] button on the control panel when the device is OFF-mode by
the weekly timer.
When the power switch is turned off, the weekly timer does not work.
Auto power save mode
This function allows this equipment automatically to go into the energy saving mode (unnecessary electricity is cut off
at standby) if it is left inactive for a certain period of time.
Sleep mode
This function allows this equipment goes into the sleep mode that stands by with the minimum power consumption.
Neither [AUTO POWER SAVE] nor [SLEEP MODE] is available for the European version.
1
Press [GENERAL] in the ADMIN menu.
The GENERAL menu is displayed.
To display the ADMIN menu, see the following page:
P.63 "Entering Admin Menu"
2
Press [ENERGY SAVER].
The ENERGY SAVER menu is displayed.
72 Setting General Functions