SoftBank 816SH User Manual page 317

Update Result
3 While Information window appears,
A Press b
select Update Result
B Press b again to exit.
3 In Standby, press b A
Select Settings
A Press b A
Select Software Update
A Press b A
Select Update Result
Press b
B Press b again to return.
I ^ Update failure may disable handset. Contact SoftBank
Note
Customer Center, Customer Assistance (P.19-37).
^ Phone Book entries, media files, and other handset
contents are not affected by firmware updates, but
always back up important information. (Some files
cannot be copied.) SoftBank cannot be held liable for
damages from lost information, etc.
^ If handset does not return to Standby after update, turn
power off, reinsert battery, then restart it.
3Scheduled Update
Confirmation appears at scheduled update
time. Press b or wait about ten seconds
for update to start.
^ Update will not start if other functions are in
use. After all operations end, a confirmation
appears. If operations do not end within
A
ten minutes, scheduled update is
automatically canceled.
^ When Keypad Lock is Active
B If set to Link to Slider (P.9-18), handset reboot with Slider
B If set to Manual (P.9-18), handset reboot automatically
open automatically cancels it; remains active if Slider is closed.
cancels it regardless of Slider position.
Confirmation
19
19-3