Editing Characters; Deleting & Replacing; Copy/Cut & Paste - SoftBank 816SH User Manual

Editing Characters

Deleting & Replacing
3
1 Use G to select a character and
press i
The highlighted character is deleted.
3 Press i for 1+ seconds to delete
characters on and after cursor.
3
To delete all text, place cursor at the end
of text and press i for 1+ seconds.
2
Enter another character
Recovering Deleted Characters
3 Press f once for each character immediately after deletion
to recover up to 64 characters.
^ Not available for Arrange Mail or after using i (Long Press).
Copy/Cut & Paste
When Options appears, copy or cut and paste text into the
same window or another.
^ Copy text strings of up to 6 KB each.
^ My Pictograms copied from Arrange Mail Composition
window, etc. may not be pasted.
1 Press N x
2 Select Copy or Cut and press b
3-8
3 Use G to select the first character of text and
press b
Start point is set.
3 To change the start point, press M s.
4 Select the end point and press b
^ Up to ten copied/cut text strings are saved in Paste List
i
(below). Entries appear most recent first.
3 To undo Cut, press f.
5
Open text paste target window
6 Press q for 1+ seconds
3 To undo Paste, press f.
3 Press N x
A Press b
^ Available when text is saved in Paste List.
B To reset the list, press N l
^ In Arrange Mail Composition window (P.14-8), last text string
copied or cut is pasted. Paste List does not appear.
Using Paste List
A A Press b A
Select Paste
A
Choose Yes
Select text
A Press b