Characters; Character Entry Basics; Switching Entry Modes - SoftBank 816SH User Manual

Characters

Use Kana and Pager (P.3-5) to enter alphanumerics,
3
Symbols, hiragana, kanji, katakana and Pictograms.
Unless noted otherwise, text entry operations are described
for use in text entry windows using Kana Mode.

Switching Entry Modes

1 Press j
^ Entry mode list appears.
2 Use E to select a mode and
press b
^ For Pictogram or Symbols,
corresponding list appears. (Entry
mode remains unchanged.)
^ Available Modes:
A Kanji (hiragana)
C Double-byte katakana
D Single-byte katakana
Double-byte alphanumerics
E
(upper/lower case)
Double-byte alphanumerics
F
(lower case)
3-2
Current Entry Mode
Single-byte alphanumerics
G
(upper/lower case)
Single-byte alphanumerics
H
(lower case)
I Single-byte number
B Character Code

Character Entry Basics

Use Keypad to enter characters. Multiple characters are
assigned to each key. Press a key to toggle between
character options for that key.
Example: In double-byte katakana entry, press 1
three times.
1 1
^ Press f to toggle options in reverse. (Not available for
single-byte numbers or Character Codes.)
^ Key Assignments: P.19-10
3Entering Characters Assigned to the Same Key
When the next character is on the same key, press A first
to move cursor.
Example: In single-byte alphanumerics mode, enter no.
66
Press a key for 1+ seconds to enter the current character
and advance cursor.
66 6 (Long Press)
1
A 666
666