Video Call; Initiating A Call - SoftBank 816SH User Manual

Initiating a Call

2
1
CHECK!
^ Confirm handset is on.
^ Check signal strength
(P.1-6 1).
^ Handset will not transmit
when B, X, I or Y
appears (P.19-4 - 19-6).
2-2
See P.2-3 to initiate international calls from Japan, P.2-16 for Voice Calls from outside Japan
and P.5-3 for Video Calls.
1
Enter a phone number
2
3
^ Include area code for all numbers.
I ^ Earpiece is a speaker. Always maintain some distance from Earpiece/Speaker while
Note
ringtones, music or other handset sounds play.
^ Do not cover Microphone while talking.
^ Avoid covering area over Internal Antenna.
^ Voice quality is affected depending on how and where handset is used.
I ^ For operations during a call (Loudspeaker, Mute, Hold, etc.), see P.2-10 - 2-11.
Tip
^ To send/block Caller ID, enter the following numbers/symbols before a phone number when
placing a call.
Send
B Alternatively, enter a phone number and press N x to select Show My ID or Hide My ID.
186 or q31p
2 Confirm the number and press f
Handset dials the number.
Correcting Numbers
^ Use F to move cursor and press i to
delete the digit above the cursor. Move
cursor and press i for 1+ seconds to
delete the digits above and after the cursor.
^ Before moving cursor, press i for
1+ seconds to delete the entire number and
return to Standby.
3 Press g to end call
^ Alternatively, close Slider to end call.
3
Close To: P.9-26
184 or p31p
Block