Charging (Ac Charger) - SoftBank 816SH User Manual

Charging (AC Charger)

Use specified AC Charger only.
2
1
Open Port Cover to connect Charger
^ Use slot to gently pull Port Cover
down and out as shown.
^ Insert connector until it clicks.
2
Plug Charger into AC outlet
^ Small Light illuminates red while charging (P.1-11); may take
up to approximately 140 minutes.
^ When charging completes Small Light goes out.
^ Extend Charger blades. (Fold back when
not in use.)
AC 100V Outlet
AC Charger
Release Tabs
Blades
Arrows Up
3
Charger Connector
Slot
External Device Port
Port Cover
Small Light
1
3
After Charging
Unplug Charger, then disconnect handset
^ Squeeze release tabs to remove connector.
^ Replace Port Cover to protect External Device Port.
I ^ Do not pull, bend or twist AC Charger cord.
Note
^ Pull AC Charger straight out to unplug it.
^ AC Charger is compatible with household currents
between AC 100V and 240V.
^ SoftBank is not liable for problems resulting from
charging battery abroad.
1
1-13