Sending Text Messages; Character Entry Limits; Mail Composition Overview - SoftBank 816SH User Manual

Sending Text Messages

Character Entry Limits

SMS Message 160 single-byte alphanumerics
Subject 512 single-byte alphanumerics
S! Mail
Message Approximately 30,000 single-byte alphanumerics
*
When Char-code (P.14-34) is set to GSM 7bit.
^ S! Mail message text character limit differs by attachment size.
^ Approximate mail size appears in Mail Composition window.

Mail Composition Overview

SMS
Enter Recipient
Compose Message
Send Message
*
S! Mail
Enter Subject
Attach Files
Add Arrange Mail Effects
Apply Feeling Mail Settings
Incoming Calls while Creating Message
3 Content is saved temporarily. End the call to return.
When Recipient Handset is Off or Out-of-Range
3 Messages are stored in Server Mail Box, and delivered when
recipient handset detects signal.
Delivery Failure
3 Information window opens (J appears).
To send unsent messages, select Sending failure
Press b A
Select a message
^ If failed again, Unsent Messages folder opens. To use unsent
messages, see P.14-26 "Sending from Sent/Unsent Messages."
3 Activate Auto Resend (P.14-14) to reattempt to send unsent
messages automatically up to two times.
^ If messages are not sent after three attempts, follow the
above steps to send manually.
^ Auto Resend may send the same message twice.
Canceling Outgoing Message
3 While Sending... appears, press M 3.
3 Message is sent even if Slider is closed.
A
A Press b
14
14-3