Scan Barcode; Scanning Printed Barcodes - SoftBank 816SH User Manual

Scan Barcode

Use mobile camera to scan printed barcodes (UPC/JAN or
QR Codes) or read barcode images saved in Data Folder.
^ In Continuous mode, scan up to 50 UPC (JAN) or 16 QR
Codes at one time. In some cases, continuous scans may be
disrupted depending on the codes.
^ Zoom is not available.
I ^ Scan may fail if:
Note
B The barcode is dirty or unclear
B The barcode is scanned under inadequate light
B Multiple barcodes are captured at one time
^ Barcode/Scan menu will not open if music is playing;
when Stop music? appears, choose Yes and press b
to proceed.
I ^ Adjust Anti-flicker setting to reduce Display flicker.
Tip
12
^ A UPC (Universal Product Code) or JAN (Japanese
Article Number) is a series of varying width vertical
lines (bars) and spaces. Bars and spaces together are
elements, combinations of which represent different
numbers. Handset cannot read other one-dimensional
barcodes (ITF Code, Code39, Codabar/NW-7, etc.).
^ A QR (Quick Response) Code is a matrix symbology
consisting of an array of nominally square cells, which allows
omni-directional reading of up to 4,296 alphanumerics and
byte data, as well as kanji and kana.
12-22

Scanning Printed Barcodes

I A
Tools Tools 3 (F)
Main Menu
Barcode
1
Frame barcode in the center of
Display
^ Hold handset approximately 10 cm away
from barcode.
^ Use Focus Adjustment Bar as a guide
(better focus in darker blue).
2 Press b
Mobile camera scans the barcode.
^ If recognition takes time, move handset
slowly and adjust the distance from barcode.
3 Press M 3 to stop scan
3
Barcode recognition tone
sounds and scan results appear
3
Using Scan Results: P.12-23
3 To start over, press i A
A Press b A
Repeat from Step 1
A A
Barcode/Scan Scan
Focus Adjustment Bar
A
Start over from Step 1
Choose Yes