Battery Installation - SoftBank 816SH User Manual

1

Battery Installation

Inserting
1
Press down and slide cover as
shown
^ Hold handset firmly by its sides.
2
Lift and remove cover as shown
3
Insert battery
^ With printed side up, fit tabs into
battery cavity slots.
4
Close cover
^ Position and slide the cover gently as
shown until it stops.
1-12
Removing
^ Turn handset power off before removing battery.
Battery
e
Cover
^ Do not remove battery immediately after saving files, sending
messages, etc.
1
f Perform Steps 1 - 2 on the left
2
Push and lift battery as shown
^ Take hold of Battery Tab (f) and lift as
shown.
Battery Disposal
Do not dispose of an exhausted battery with ordinary
refuse; always tape over battery terminals before disposal.
Take battery to a SoftBank shop, or follow the local disposal
regulations.
I
Tip
This product requires a lithium-ion
battery. Lithium-ion batteries are a
recyclable resource.
^ To recycle a used lithium-ion battery, take
it to any shop displaying the symbol
shown to the right.
^ To avoid fire or electric shock, do not:
B Short-circuit battery B Disassemble battery
f
e