Usim Card Installation; Usim Pins - SoftBank 816SH User Manual

USIM Card Installation

^ Follow the steps below after removing battery (P.1-12).
^ Take care not to lose removed USIM Card.
Inserting
1
Pull out Stopper as
shown until it clicks
2
Slide in USIM Card
with IC chip facing
down
3
Push in Stopper
until it clicks
^ Reinstall battery
(Steps 3 - 4 on P.1-12).
Removing
1
Pull out Stopper as
shown until it clicks
2
Gently slide out
USIM Card as
shown
3
Push in Stopper
until it clicks
^ Reinstall battery (Steps
3 - 4 on P.1-12).

USIM PINs

There are two Security Codes for USIM Card: PIN1 and PIN2.
PIN 1 and PIN 2 are 9999 by default; change as needed (P.9-22).
A 4-digit Security Code to prevent unauthorized use of
PIN1
handset; required when PIN Entry (P.9-22) is active
Stopper
PIN2 Required to clear Call Costs and to set Max Cost (P.9-24)
PIN Lock & PUK Code
Entering incorrect PIN1 or PIN2 three consecutive times
Notch
activates PIN1 Lock or PIN2 Lock. Personal Unblocking Key
(PUK Code) cancels PIN Lock. Call SoftBank Customer
Center, General Information (P.19-37) for details.
3 Open a function requiring PIN
Press b
A Press b
PIN
^ Entering incorrect PUK Code ten consecutive times locks
USIM Card, disabling handset. Write it down. To learn how
to unlock USIM Card, contact SoftBank Customer Center,
General Information (P.19-37).
e
f
Canceling PIN Lock
A
Enter PUK Code
A A Press b
Enter new PIN
1
A
A
Re-enter new
1-3