Daikin VRV II-Q RQYQ8-48PY1B Service Manual page 87

SiBE341027
c. Monitor mode
To enter the monitor mode, press the
MODE (BS1) button when in
"Setting mode 1".
<Selection of setting item>
Press the SET (BS2) button and set
the LED display to a setting item.
<Confirmation on setting contents>
Press the RETURN (BS3) button to
display different data of set items.
Press the RETURN (BS3) button
and switches to the initial status of
"Monitor mode".
∗ Press the MODE (BS1) button and
returns to "Setting mode 1".
Test Operation
000
No. Setting item
0 Various settings
1 C/H unified address
2 Low noise/demand address
4 AIRNET address
Number of connected indoor units
5
*1
Number of connected BS units
6
Number of connected zone units
7
(Fixed to "0")
8 Number of outdoor units *2
11 Number of zone units
12 Number of terminal units *3
13 Number of terminal units *3
14 Contents of error (the latest)
Contents of error
15
(1 cycle before)
Contents of error
16
(2 cycle before)
20 Contents of retry (the latest)
21 Contents of retry (1 cycle before)
22 Contents of retry (2 cycle before)
Number of multi connection
25
outdoor units
The numbers in the "No." column represent the number of times to press the
SET (BS2) button.
*1. Number of connected indoor units
Used to make setting of the number of indoor units connected to an outdoor
unit.
*2. Number of outdoor units
Used to make setting of the number of outdoor units connected to DIII-NET
that is one of the communication lines.
*3. Number of terminal units
Used to make setting of the number of indoor units connected to DIII-NET
that is one of the communication lines.
(Only available for VRV indoor units)
Field Setting from Outdoor Unit
LED display
H1P H2P H3P H4P H5P H6P
l h h h h h h
l h h h h h k
l h h h h k h
l h h h k h h
l h h h k h k
l h h h k k h
l h h h k k k
l h h k h h h
l h h k h k k
l h h k k h h
l h h k k h k
l h h k k k h
l h h k k k k
l h k h h h h
l h k h k h h
l h k h k h k
l h k h k k h
l h k k h h k
Data display
H7P
Lower 4 digits
Lower 6 digits
Lower 4 digits:
upper
Lower 4 digits:
lower
Error code table
Refer to
P. 100 ~ 103
Lower 6 digits
77