Leica mojo 3D User Manual page 363

Final setup opera-
tions, step-by-step
Leica mojo3D, mojo3D Enhancements
If you are unsure about writing configuration to the steering controller, or you
know that the steering controller is configured, select the Skip button.
Tap to continue.
22. Depending on the steer kit selected, the Enable Stationary Engage screen may
appear. Configure its fields accordingly and tap
23. Depending on the steer kit selected, the Steering Adjustment screen may appear.
Follow the instructions on the screen to adjust the steering. Tap
24. Tap the Restart Now button and tap
25. Wait for the mojoXact to complete the restart, then tap

The mojo3D will display an error message on completion of connection if
the mojoXact/mojoXact Plus has not restarted completely.
To finalise the mojo3D to mojoXact connection, carry out the following steps:
1. Test the steering function, according to "Testing the auto-steer function, step-
by-step" see "5.4 Testing Auto-Steer".
2. Check the tuning, according to "5.2.1 Tuning Procedure".
to continue.
to continue.
to continue.
to continue.
363