Leica mojo 3D User Manual page 350

Leica mojo3D, mojo3D Enhancements
• If Internal Radio or External Radio is selected, the Correction Source Status
screen appears indicating the success or failure of the connection. Tap the
button to proceed to the Enable GL1DE
• If Network RTK is selected, further configuration is required and this is
explained in "10.4 Network RTK". Then the Correction Source Status screen
appears indicating the success or failure of the connection. Tap the
button to proceed to the Enable GL1DE
TM
• If GL1DE Only is selected, no extra configuration is required, and the
Antenna Separation/Vehicle Height/Red Antenna Offset screen appears (step
60.) when the
59. On the Enable GL1DE
system use the GL1DE
tion source fails, by tapping the Enable GL1DE
TM
• GL1DE Fallback Time Limit is the time in minutes that the system will use the
TM
GL1DE correction source. If the originally configured correction source has
not come back online in this time period, then auto-steer is disabled.
• Drift Limit - if the originally configured correction source comes back online
and the drift from the wayline is less than this value (in metres) then auto-
button is tapped.
TM
Fallback screen the operator can choose to have the
TM
correction source in the event that their chosen correc-
TM
Fallback screen.
TM
Fallback screen.
TM
Fallback box so it turns green.
350