Leica mojo 3D User Manual page 358

Leica mojo3D, mojo3D Enhancements
4. Select the necessary correction
type from the list.

This will depend on the particular installation and the method chosen for
GPS corrections, for example Base Station via internal radio.
5. Additional configuration information will need to be selected for most Correction
Source options. After setting this information tap
6. The screen will display the correction data being received and also the strength
of the correction signal. Tap

TM
If GL1DE
7. If a correction source other than GL1DE
Fallback screen appears. At this screen the operator can choose to have the
system use the GL1DE
tion source fails. To select this option, tap the Enable GL1DE
turns green.
to continue.
Only was selected this screen will not be displayed.
TM
correction source in the event that their chosen correc-
to continue.
TM
Only was selected, the Enable GL1DE
TM
358
Fallback box so it